Home Technical Services Completions VVANISH™ Dissolvable Ball


VVANISH™ Metal Dissolvable Frac Ball

VVANISH™ metal dissolvable frac ball is the key component used to achieve zonal isolation while doing a frac job. In plug & perf operation, VVANISH™ will set on the ball seat of frac plug to block the intervals below the plug, and these plugs could be dissolvable bridge plug, big-bore bridge plug or composite bridge plug. VVANISH™ could also be utilized as the activation device to open the frac sleeves. To open multi-stage frac sleeves, VVANISH™ frac balls with gradient ODs will be selected, and one VVANISH™ could open one or more sleeves depending on the sleeve designs. After opening targeted sleeves, VVANISH™ frac ball will set on the ball seat of the inner sleeve, and frac operation could be achieved by increasing the pump rate. After frac is done, VVanish™ metal dissolvable frac ball will dissolve in the downhole environment, leaving ZERO debris downhole.


Standard size available from 1” to 3.75” (customizable)

Specific gravity 1.87

Dissolves in fresh water or formation water with salinity (optional)

Requires no acid or other chemicals to dissolve

Optional surface coating to delay dissolution and maintain stability until stimulation operations are completed

10K psi pressure rating

Manufactured with strict tolerances to ensure success of operations

Over 1000 VVANISH™ frac balls run in hole with ZERO failure




VVANISH Dissolvable Ball Flyer

© 2017. «EMED-Co». All Rights Reserved.